Looking for Answers about PartsAndAccessories|ForMen|FoilShaverParts?

Customer Questions and Answers for
PartsAndAccessories|ForMen|FoilShaverParts

Customer Questions and Answers:
943 Questions
 | 
955 Answers

Customer Questions and Answers for PartsAndAccessories|ForMen|FoilShaverParts

Question

I need the micro screens for my razor. MS3-1000

Is there a dealer in Arlington, Texas that handles these still? I think I got them from Sears at one time. Please advise
Age: Over 65
Gender: male
asked 5 years, 4 months ago
Customer avatar
by
peanut
Arlington, Texas
on PartsAndAccessories|ForMen|FoilShaverParts
-9points
0out of 9found this question helpful.
Answer this question
3 answers
Answers
answer 1
I think you can only get the combination blades & foil screen together. All companies are in the business of making money, peanut dude. ;-(
Age: 55-65
Gender: male
answered 4 years, 6 months ago
Customer avatar
by
Robbie
Ct
0points
2out of 4found this answer helpful.
answer 2
You can use the SP-94: Screens & Cutters for Remington® Microscreen 3 TCT Shavers.
Age: 25-34
Gender: female
answered 5 years, 4 months ago
Customer avatar
by
MsRemington
+2points
2out of 2found this answer helpful.
answer 3
Amazon has them.
Age: Over 65
Gender: male
answered 5 years, 4 months ago
Customer avatar
by
Slim
Chula Vista, California
+1point
2out of 3found this answer helpful.
Question

trimmer won't stay down

I have a Model MS3-2700 shaver and the trimmer is in the up position and will not stay down. How can I fix this problem.
Age: 55-65
Gender: male
asked 4 years, 3 months ago
Customer avatar
by
Georgew
Altoona, Pa
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
If the 2700 is like the 4700 do this:
Remove the foil & cutters.
Remove the 4 screws in each corner.
While depressing the buttons to remove the foil lift up on be part you removed the screws from.
Now remove the hair from below the sliding rails of the trimmer. I made a little hook out of #24 solid wire. After you get the hair out the cutter will latch down.
When reinstalling the part you removed be sure to orient the motor shaft front to back.
Replace the part install the 4 screws, cutters and foil, that's it.
Age: Over 65
Gender: male
answered 3 years, 10 months ago
Customer avatar
by
mmcl26554
White Hall, WV
0points
0out of 0found this answer helpful.
answer 2
Thank you for your message regarding your Remington Product. The reason the trimmer will not stay down is due to a buildup of hair in that area where it "catches". What we suggest you do is purchase a can of aerosol "air"(the type of spray air in a pressurized can you that you use to clean out computer keyboards, etc.) and try to blast that area to remove the hairs that have built up. If this does not work, you do have a two year warranty (from the date of the receipt) for your shaver. If the unit has been purchased within the
last two years, you can send it back to us for replacement. Just include a copy of your receipt and send this to:

Spectrum Brands
507 Stokely Dr
PO Box 1
Deforest WI 53532

Make sure to include a letter on the inside of the package with your name, address, phone and the reason for the return. We suggest that you send the package in a traceable manner either through UPS with a tracking number or with a delivery confirmation through the Post Office.
Age: 25-34
answered 4 years, 3 months ago
Customer avatar
by
remingtonservice
Wisconsin
+1point
1out of 1found this answer helpful.
Question

What is a compatible relpacement foil and cutter head for the DA 107?

Age: 45-54
asked 4 years, 7 months ago
Customer avatar
by
honda
on PartsAndAccessories|ForMen|FoilShaverParts
-1point
0out of 1found this question helpful.
Answer this question
2 answers
Answers
answer 1
If you go to the Remington website and type SP-62 in the search box this would be the replacements you are looking for

SP-62: Screens & Cutters for Remington® Microscreen 2 Shavers
Age: 35-44
answered 4 years, 7 months ago
Customer avatar
by
Moofy
Green Bay, Wisconsin
+2points
2out of 2found this answer helpful.
answer 2
Thank you for your message. You need replacement part SP-62. Please let us know if we can be of further assistance.
Age: 25-34
 
Products related to my answer
 
answered 4 years, 7 months ago
Customer avatar
by
remingtonservice
Wisconsin
+1point
1out of 1found this answer helpful.
Question

i need screens and cutters for my ms 5120

Age: Over 65
Gender: male
asked 10 months ago
Customer avatar
by
Gillie
Rugby, Rugby, Warwickshire, UK
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Please call us at 1-800-392-6544 so that we can assist you further.
Age: 35-44
Gender: female
answered 10 months ago
Customer avatar
by
customerservice1
0points
0out of 0found this answer helpful.
answer 2
Please call us at 1-800-392-6544 with the shaver with you so that we can assist you.
Age: 35-44
Gender: female
answered 10 months ago
Customer avatar
by
customerservice1
0points
0out of 0found this answer helpful.
Question

Are screen and cutter available for Remington shaver code # F7790

The product was used only for two months and there was hole on cutter screen ... kindly advise the charges for the same .
Age: 35-44
Gender: male
asked 4 years, 1 month ago
Customer avatar
by
Biswajeet
Bhubaneswar, Orissa, India
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Please see below for the part for your shaver.
Age: 25-34
answered 4 years, 1 month ago
Customer avatar
by
remingtonservice
Wisconsin
+1point
1out of 1found this answer helpful.
answer 2
Please see below for the replacement screen and cutter for your shaver.
Age: 25-34
answered 4 years, 1 month ago
Customer avatar
by
remingtonservice
Wisconsin
+4points
4out of 4found this answer helpful.
Question

what's the p/n and pricefor the PLASTIC extender from the motor to the cutter on your model DA 307 and 407? need 3 each.

model DA 307:need 3 plastic exteder from the motor to the cutter.the ones I have (3) are worn out all else ok
my address:4016 e. tennessee st tucson az 85714
being using remington for >40 years!
Age: Over 65
Gender: male
asked 4 years, 10 months ago
Customer avatar
by
otto
on PartsAndAccessories|ForMen|FoilShaverParts
+3points
4out of 5found this question helpful.
Answer this question
2 answers
Answers
answer 1
They don't bother to sell parts. Buy a new one and throw yours away.
Age: 55-65
Gender: male
answered 4 years ago
Customer avatar
by
Rustypatina
Conyers, GA
-3points
0out of 3found this answer helpful.
answer 2
Thank you for your message. Unfortunately, we do not have this information available to give out. Please contact a local Authorized Service Dealer for assistance. Your nearest one can be found by visiting our website.
Age: 25-34
answered 4 years, 10 months ago
Customer avatar
by
remingtonservice
Wisconsin
-3points
0out of 3found this answer helpful.
Question

I need to order micro screen & cutters for a MS 200 shaver

It is extremely difficult to read the model no on my razor but appears to be either MS 200 or MS 250.
Age: Over 65
Gender: male
asked 4 years, 4 months ago
Customer avatar
by
Richard
Hollister MO
on PartsAndAccessories|ForMen|FoilShaverParts
-1point
0out of 1found this question helpful.
Answer this question
2 answers
Answers
answer 1
Your website "search" doesn't recognize PN MS 200.
Age: Over 65
Gender: male
answered 4 years, 4 months ago
Customer avatar
by
Richard
Hollister MO
-4points
0out of 4found this answer helpful.
answer 2
Thank you for your message. You may purchase the replacement parts by visiting our website or calling our sales department.
Age: 25-34
answered 4 years, 4 months ago
Customer avatar
by
remingtonservice
Wisconsin
-2points
0out of 2found this answer helpful.
Question

I need a foil for my DA 307 model electric Shaver

I need a foil for my model # DA 307
Age: 55-65
Gender: male
asked 3 years, 4 months ago
Customer avatar
by
123456789
on PartsAndAccessories|ForMen|FoilShaverParts
+1point
1out of 1found this question helpful.
Answer this question
2 answers
Answers
answer 1
That is my question. How an I get a foil screen for my DA 307 razor? Cost? Is it cheaper to buy a whole new razor?
Age: 55-65
Gender: male
answered 2 years, 5 months ago
Customer avatar
by
jfish
Neola IA 51559
+7points
9out of 11found this answer helpful.
answer 2
Thank you for your inquiry. SP-62 is the replacement part number. For price and availability, please refer to our website.
Age: 25-34
answered 3 years, 4 months ago
Customer avatar
by
CustomerService
+6points
7out of 8found this answer helpful.
Question

My rotary Shaver has no model number how do I know which blades to replace?

Don't know what model I have to replace the Shaver heads
Age: 55-65
Gender: male
asked 3 months ago
Customer avatar
by
izrsoblu
Davie Florida
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
look for refundable product before ordering replacement, less stress. :-)
Age: 55-65
Gender: male
answered 3 weeks, 5 days ago
Customer avatar
by
wholoves
Dallas, TX, USA
0points
0out of 0found this answer helpful.
answer 2
The model number should be on the back side of the pop-up trimmer on the silver plate.
Age: 25-34
answered 2 months, 3 weeks ago
Customer avatar
by
RemConSer
0points
0out of 0found this answer helpful.
Question

Looking for a switch cover for my ms2-390

This is the rubber cover that goes over the power button
Age: Over 65
Gender: male
asked 9 months ago
Customer avatar
by
HiLifter
Pasco, WA
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Please send us an email directly by clicking the CONTACT US link located on our website. Once we receive your email, we will forward your information to someone in your area that can better assist you.
Age: 25-34
answered 9 months ago
Customer avatar
by
RemConSer
0points
0out of 0found this answer helpful.
answer 2
The rubber button is not a replaceable part.
Age: 25-34
answered 9 months ago
Customer avatar
by
RemConSer
0points
0out of 0found this answer helpful.
Question

I need a charger for an F3790

Age: Over 65
Gender: male
asked 4 years, 9 months ago
Customer avatar
by
Rowan
Providence, UT
on PartsAndAccessories|ForMen|FoilShaverParts
0points
1out of 2found this question helpful.
Answer this question
2 answers
Answers
answer 1
where can I get a charger from
Age: 35-44
Gender: male
answered 4 years, 1 month ago
Customer avatar
by
dwade
Minneapolis mn
+1point
1out of 1found this answer helpful.
answer 2
Thank you for your message. You may order the replacement charging cord by calling our customer service department or visiting our website directly.
Age: 25-34
answered 4 years, 9 months ago
Customer avatar
by
remingtonservice
Wisconsin
+1point
1out of 1found this answer helpful.
Question

model 6xf1 xl810 need a new screen where can I find it

xl810 need a new screen
Age: 55-65
Gender: female
asked 4 years, 8 months ago
Customer avatar
by
Suzieq
Berea,Ohio
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Thank you for your message. We are sorry to inform you that we no longer manufacture the item you speak of. I have checked with our sales department and they informed me that we no longer have any remaining stock or parts for purchase.
Age: 25-34
answered 4 years, 8 months ago
Customer avatar
by
remingtonservice
Wisconsin
0points
0out of 0found this answer helpful.
Question

MS-280 replacement cutters/screen

I need new cutters & screen for my MS-280 but can't find the specified SP-69 anywhere locally. The SP-62 looks like it will fit, is it suitable?
Thanx,
Ray
Age: 55-65
Gender: male
asked 4 years, 7 months ago
Customer avatar
by
Rayy
Groton, CT
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Thank you for your message. SP-69 is the correct replacement part for your unit. You may order this part by calling our sales department or by visiting our website.
Age: 25-34
answered 4 years, 7 months ago
Customer avatar
by
remingtonservice
Wisconsin
0points
0out of 0found this answer helpful.
Question

Are foils available for the F5790

How much are they
Age: Over 65
asked 4 years, 5 months ago
Customer avatar
by
Poppie
Westfield Ma.
on PartsAndAccessories|ForMen|FoilShaverParts
+1point
1out of 1found this question helpful.
Answer this question
1 answer
Answers
answer 1
Thank you for your message. The foils & cutters are sold as a set and you may check availability/pricing by visiting our website.
Age: 25-34
answered 4 years, 4 months ago
Customer avatar
by
remingtonservice
Wisconsin
0points
0out of 0found this answer helpful.
Question

I need replacement foil for MS3-3700? Is the SP-94 microscreen compatible with my razor?

Age: 35-44
Gender: male
asked 4 years, 5 months ago
Customer avatar
by
freddie
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Thank you for your message. Yes, SP-94 is the correct part for your unit. Please let us know if we can be of further assistance.
Age: 25-34
answered 4 years, 4 months ago
Customer avatar
by
remingtonservice
Wisconsin
0points
0out of 0found this answer helpful.
Question

I need a battery for my foil shaver MS3-4000

Age: Over 65
Gender: male
asked 4 years, 2 months ago
Customer avatar
by
JimMc
Austin TX USA
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Please contact an Authorized Service Dealer for assistance. You may search for the nearest one to you by visiting our website.
Age: 25-34
answered 4 years, 2 months ago
Customer avatar
by
remingtonservice
Wisconsin
0points
0out of 0found this answer helpful.
Question

Replacement parts for foil and shavers for MS2 390

Age: Over 65
Gender: male
asked 4 years ago
Customer avatar
by
ReformerRay
Dublin, Ohio
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
You may purchase parts from our website or by calling our customer sales department.
Age: 25-34
 
Products related to my answer
 
answered 4 years ago
Customer avatar
by
customerservice
0points
0out of 0found this answer helpful.
Question

Can the rechargeable battery be replaced in Model DA 307?

If so, where can a battery be purchased?
Age: Over 65
Gender: male
asked 4 years ago
Customer avatar
by
dave1
St Paul, MN, USA
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
The batteries cannot be replaced. We apologize for any inconvenience this may cause.
Age: 25-34
answered 4 years ago
Customer avatar
by
customerservice
0points
0out of 0found this answer helpful.
Question

Do you have a cord for the R1000?

Age: 45-54
Gender: male
asked 4 years ago
Customer avatar
by
Rayfly77
Los Angeles, CA, USA
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Thank you for your message. You may order the replacement cord from our website or by calling our customer sales department.
Age: 25-34
 
Products related to my answer
 
answered 4 years ago
Customer avatar
by
customerservice
0points
0out of 0found this answer helpful.
Question

How can I replace the trimmer on my Remington DA 307?

The trimmer has become dull and no longer works even though the shaver is claery fully charged and on.
Age: 18-24
asked 3 years, 8 months ago
Customer avatar
by
joshua
new brunswick, nj
on PartsAndAccessories|ForMen|FoilShaverParts
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Thank you for your inquiry. The trimmer is not replaceable on our shavers, but is guaranteed for 2 years. If you believe you product is still under warranty, please contact our consumer service department for assistance.
Age: 25-34
answered 3 years, 8 months ago
Customer avatar
by
customerservice
0points
0out of 0found this answer helpful.
1 2 3 4 5 ... 48 next>>